Appendix 12: EEG Chomper Installation
WayForward Technologies CHOMPER™
You should have received the following items:
Chomper Installation CD
EEGer Keyblock File Disk (license update, if games purchased separately)
In order for Chomper to run, you will be installing game software on the Game computer and a license file on the Therapist computer.
System Requirements for Chomper
EEGer software version 4.1.5E or greater; Chomper currently requires EEGer Two-Computer Setup.
Pentium 133 or greater, 32 MB RAM
ATI video or comparable
Windows 98SE or greater
DirectX Version 9.0
IMPORTANT: Before installing a newer version of DirectX, be certain your video driver is compatible with that version of DirectX or you may experience problems with displays.
Chomper Installation
A. Game Computer - Software Installation
1. If the EGS game menu is displayed, press Esc to exit to Windows.
2. Insert the installation CD into the game computer's CD/DVD drive.
3. In just a moment, the CD should start automatically and ask if you would like to install Chomper. (If the CD does not start automatically, double-click on the "My Computer" icon, and double-click on the CD/DVD drive icon.)
4. Click "Install Chomper" and follow the on screen installation steps, choosing the default options.
5. When the install has finished, complete Chomper Setup.
a. Select: START | PROGRAM FILES | WAYFORWARD | EEG CHOMPER SETUP
b. Set the RESOLUTION to 640x480x16-bit.
c. Move the LEVEL OF DETAIL slider all the way to the right.
d. Set TEXTURE FILTERING to BETTER.
e. Click the DONE button, in the upper right-hand corner of the screen TWICE. Then press Esc twice.
6. Once the software has installed, be sure to restart the computer.
7. If using EEGer/EGS Version 4.1.x or greater, finalize the game installation: Launch EGS and press F9. When the list of installed games appears, click DONE-Save Configuration.
B. Therapist Computer - License Keyblock File Installation:
1. Insert the EEGer Keyblock File Disk into the appropriate disk drive.
2. Double-click the EEGer icon to start the program.
3. Select Files - Read EEGer Keyblock Files.
4. When prompted, use the Open dialog to locate the keyblock file on the CD. Click the filename to highlight the file and click OK.
5. Finalize the Games:
a. EEGer/BGS Version 4.0.x: Select Tools - Update Installed Games List in EEGer.
b. EEGer/EGS Version 4.1.x or greater: In EEGer, select Tools - Retrieve Installed Games List, then Tools-Tailor Installed Games and click SAVE All Games.
Congratulations! You have successfully installed Chomper.
Troubleshooting: If Chomper Does Not Run
• Be sure to restart both computers.
• If Chomper does not show up as a choice on the Therapist menu,
then you do not have the appropriate EEGer keyblock file installed.
• Check to make sure that the key number written on the floppy/CD Keyfile disk matches your system's software key. You can find your software key number in the lower left corner of the main EEGer display or in Preferences, Configuration, on the Keyfile Settings tab.
• Make sure you don't press any keys (e.g, F9 or F11) on the Therapist computer until Chomper displays "Ready" or the game might not start when F5 is pressed.
• If segments of the Chomper display are missing when the game is played, go back to Step A5 and recheck the setup options.
Note: A keyfile disk may contain more than one key number, however, a single purchase of Chomper is only licensed to run on one system. You must purchase additional copies for additional systems.
For assistance, contact EEG Spectrum Systems Technical Support:
(818) 379-7050 x832 or support@eegspectrum.com